YASKAWA E-V Series User Manual page 198

6 Utility Functions (Fn
Step
8
9
(2) Related Parameters
Use the following parameters as required.
Sweep Force Reference Amplitude
Pn456
Setting Range
Parameter
n.
n.
Pn408
n. 0
n. 1
1st Notch Filter Frequency
Pn409
Setting Range
50 to 5000
2nd Notch Filter Frequency
Pn40C
Setting Range
50 to 5000
6-32
)
Display Example
Setting Unit
1 to 800 1%
0 Disables 1st notch filter. (Factory setting)
1 Uses 1st notch filter.
Disables 2nd notch filter. (Factory setting)
Uses 2nd notch filter.
Setting Unit
1 Hz
Setting Unit
1 Hz
Keys
Press the
frequency detection. The notch filter frequencies are
updated to the optimum values. If the first stage notch
filter frequency has been set, set the second stage
notch filter frequency (Pn 40C) to Pn 408 = n.
Notes:
• If the second stage notch filter frequency has
already been set, the notch filter frequency cannot
be set in Pn408 = n. 1
• If the frequency detected by this function is not
used, set the notch filter to be invalid (Pn408 =
n. 0).
Press the
Mode main menu.
Speed Position
Factory Setting
15
Meaning
Speed Position
Factory Setting
5000
Speed Position
Factory Setting
5000
Description
Key after the normal completion of
.
Key to return to the Utility Function
Force
Classification
When Enabled
Immediately Tuning
When Enabled Classification
Immediately Setup
Force
Classification
When Enabled
Immediately Tuning
Force
Classification
When Enabled
Immediately Tuning
1 .