Overview Of The U8903A; Introduction - Keysight U8903A Quick Start Manual

1

Overview of the U8903A

Introduction

The U8903A is a powerful, multichannel audio measurement system that
combines both generator and analyzer.
The U8903A standard features include the following:
– Audio generator covering the frequency range of 5 Hz to 80 kHz. Its sine
– Audio analyzer covering the frequency range of 10 Hz to 100 kHz and
– Graph display of the time and frequency domain views of the signal
– Voltage, frequency, and phase sweep capability
– GPIB, LAN, and USB remote interface
Using the generator mode, you can generate not only a basic sine waveform, but
also square, dual sine, variable phase, noise, DC, multitone, and arbitrary
waveforms.
The analyzer mode enables you to perform a wide range of audio measurements
consisting of voltage, frequency, THD + N, SINAD, SNR and noise level, SMPTE
intermodulation distortion, difference frequency distortion (DFD), phase, and
crosstalk.
– Refer to the U8903A Audio Analyzer User's Guide for more details.
NOTE
– To search for software/firmware updates for your product, go to the Keysight
– Refer to
18
waveform amplitude range is within 0 Vrms to 8 Vrms (11.3 Vp) for the
Unbalanced or Common mode test output configuration, and 0 Vrms to
16 Vrms (22.6 Vp) for the Balanced output configuration.
amplitude range of microvolts to 200 Vp (140 Vrms)
Technical Support website at www.keysight.com/find/TechSupport.
"Appendixes"
domain and time domain, sweep, and system menu trees.
on page 79 for the generator, analyzer, frequency
Keysight U8903A Quick Start Guide