Hpe 3Par Service Processor 5.X; Accessing The Cli Session From The Service Processor Onsite Customer; Care Interface, Hpe 3Par Service Processor 4.X; Accessing The Interactive Cli Interface From The Text-Based User Interface Hpe 3Par Service Processor 5.X - HPE 3PAR StoreServ 8000 Service And Upgrade Manual

a. From the Service Console interface, select Systems.
b. On the Actions menu, select Start CLI session.
Accessing the interactive CLI interface from the Text-Based User Interface, HPE 3PAR
Service Processor 5.x
The Text-based User Interface (TUI) of the HPE 3PAR Service Processor (SP) 5.x provides an interactive
CLI interface for issuing HPE 3PAR CLI commands.
Procedure
1. Connect to the HPE 3PAR SP 5.x Linux console.
2. Log in to gain access to the Text-Based User Interface (TUI).
IMPORTANT: When logging in using the admin or hpepartner accounts, a customer-supplied
user ID and password must be obtained for the storage system. The hpesupport account
requires a strong password to gain access to the SP, but no user ID or password is needed to
access the storage system from the SP.
3. Access the interactive CLI interface from the TUI main menu.
a. Enter the number for Interactive CLI / Maintenance Mode.
b. Enter the number for Open interactive CLI.
Accessing the CLI session from the Service Processor Onsite Customer Care interface,
HPE 3PAR Service Processor 4.x
The Service Processor Onsite Customer Care (SPOCC) interface of the HPE 3PAR Service Processor
(SP) 4.x provides a CLI session only for issuing noninteractive HPE 3PAR CLI commands.
Procedure
1. Browse to the HPE 3PAR Service Processor (SP) 4.x IP address or hostname https://
<sp_ip_address>, and then press Enter.
2. Enter the account credentials, and then click Ok.
3. Access the CLI interface.
a. From the left side of the Service Processor Onsite Customer Care (SPOCC) interface home page,
click Support.
b. From the Service Processor - Support page, under Service Processor, click SPMAINT on the
Web in the Action column.
c. From the 3PAR Service Processor Menu, enter the menu option for Execute a CLI command,
and then select the storage system.
72 More information