Switch Information; Direct-Current Switch Information; Component Leds; Adapter Leds - HPE 3PAR StoreServ 8000 Service And Upgrade Manual

11. iLO Management port
12. Serial port
13. USB 3.0 ports
14. FlexibleLOM (optional)

Switch information

Direct-current switch information

The direct-current (DC) Brocade 6510 Switch is supported for the HPE 3PAR StoreServ 8000 Storage
system when installing the system in a direct-current power environment.
For more information about the Brocade 6510 Switch, see the product page:
www.broadcom.com/products/fibre-channel-networking/switches/6510-switch

Component LEDs

IMPORTANT: The HPE 3PAR StoreServ Storage system components have LEDs to indicate
whether the hardware is functioning properly and to help identify errors. The LEDs help diagnose
basic hardware problems.

Adapter LEDs

Four-Port 16 Gb FC Host PCIe Adapter LEDs

This information applies only to the HPE 3PAR Four-Port 16Gb FC Host Bus Adapter for the HPE 3PAR
StoreServ 8000 Storage system.
Figure 87: HPE 3PAR Four-Port 16Gb FC Host Bus Adapter LEDs
Table 15: HPE 3PAR Four-Port 16Gb FC Host Bus Adapter LEDs
LED function
1 Port Speed
Status Port state
3 Fast amber Connected at 8 Gb/s
flashes
4 Fast amber Connected at 16 Gb/s
flashes
Table Continued
More information 109