Date; File - HPE 3PAR StoreServ 8000 Service And Upgrade Manual

DAR -- DAR EKM status is: Error: Unable to access EKM.
Configuration or connection issue.
dar suggested action 3
Use the controlencryption status -d and controlencryption checkekm CLI commands to
view more status about encryption. Check network status for controller nodes with shownet and
shownet -d CLI commands. For the EKM server, check the status and the network connections and
status.

date

Checks the date and time on all controller nodes and reports an error if they are not the same.
Format of possible date exception messages
Date -- "Date is not the same on all nodes"
date example
Component -Identifier- -----------Detailed Description-----------
Date --
date suggested action
The time on the controller nodes must stay synchronized whether there is an NTP server or not. Use
showdate to see if a controller node is out of sync. Use shownet and shownet -d to see the network
and NTP information. NTP will not adjust the time for significant time differences, use the setdate CLI
command to set the time, date, and time zone on all controller nodes.
cli% showdate
Node Date
0 2010-09-08 10:56:41 PDT (America/Los_Angeles)
1 2010-09-08 10:56:39 PDT (America/Los_Angeles)
cli% shownetshowdatesetdate -tz America/Denversetdate 05211532showdate

file

Displays file system conditions that are not optimal:
• Checks that required system volumes are mounted.
• Checks for process, kernel, and HBA cores on controller node disk drives.
• Checks for controller node file systems that are too full.
• Checks for behavior altering files on the controller node disk drives.
• Checks if an online upgrade is in progress.
Many issues reported by the file component will require you to contact the Hewlett Packard Enterprise
Support Center.
Format of possible file exception messages
File <nodeID> "Filesystem <filesystem> mounted on "<mounted on>" is over <count>% full"
File <nodeID> "Behavior altering file "<filename>" exists, created on <date&time>"
File <nodeID> "Dump or HBA core files found"
146 Troubleshooting
Date is not the same on all nodes