HPE 3PAR StoreServ 8000 Service And Upgrade Manual page 164

vlun host:cs-wintec-test1 Host wwn:10000000C964121D is not connected to a port
vlun suggested action
Check the export status and port status for the VLUN and HOST with CLI commands such as:
•
showvlun
•
showvlun -pathsum
•
showhost
•
showhost -pathsum
•
showport
•
servicehost list
For example:
cli% showvlun -host cs-wintec-test1Active VLUNs
Lun VVName HostName
2 BigVV cs-wintec-test1 10000000C964121C
-----------------------------------------------------------
1 total
VLUN Templates
Lun VVName HostName
2 BigVV cs-wintec-test1 ----------------
cli% showhost cs-wintec-test1
Id Name
0 cs-wintec-test1 Generic 10000000C964121D ---
cli% servicehost list
HostName -WWN/iSCSI_Name-
host0 10000000C98EC67A 1:1:2
host1 210100E08B289350 0:5:2
Lun VVName
2 BigVV
vv
Displays virtual volumes (VV) that are not optimal. Checks for VVs and common provisioning groups
(CPG) whose State is not normal.
Format of possible vv exception messages
VV vv:<vvname>
VV vv:<vvname>
VV vv:<vvname>
VV vv:<vvname>
VV vv:<vvname>
VV cpg:<cpg>
VV cpg:<cpgname> "CPG growth increment is below threshold"
vv suggested action
Check status with CLI commands such as showvv, showvv -d , showvv -cpg .
164 Troubleshooting
-Host_WWN/iSCSI_Name-
-Host_WWN/iSCSI_Name- Port Type
Persona -WWN/iSCSI_Name- Port
10000000C964121C 2:5:1
Port
HostName -Host_WWN/iSCSI_Name-
cs-wintec-test1 10000000C964121D
"IO to this volume will fail due to no_stale_ss policy"
"Volume has reached snapshot space allocation limit"
"Volume has reached user space allocation limit"
"VV has expired"
"Detailed State: <state>" (failed or degraded)
"CPG is unable to grow SA (or SD) space"
Port Type
2:5:1 host
--- host
Port Type
3:5:1 unknown