Controller Node Rescue - HPE 3PAR StoreServ 8000 Service And Upgrade Manual

LED Function
3
Drive status
Figure 113: System status LEDs, left bezel ear cap, LFF enclosures front view
Table 42: System status LEDs, left bezel ear cap, LFF enclosures front view
LED Function
1
System power
System standby
2
Module fault
3
Drive status

Controller node rescue

Each controller node has a built-in node rescue network that connects the controller nodes in the system
together in a cluster through fixed physical Ethernet connections through the backplane of the controller
node enclosure (chassis). This connection in a cluster allows for a rescue to occur between an active
Status State
Amber solid Fault—An issue exists with one or more drives
within the enclosure. To determine the affected
drives, inspect the LEDs on each drive.
This LED applies only to drives.
Off No fault
Status State
Green solid Power
Off No power
Amber solid Enclosure powered by the battery
Amber solid Fault
Off No fault
Amber solid Fault—An issue exists with one or more drives
within the enclosure. To determine the affected
drives, inspect the LEDs on each drive.
This LED applies only to drives.
Off No fault
More information 131