Power Distribution Unit Information; Service Processor Information; Physical Service Processor Information, Hpe Proliant Dl120 Gen9 Server - HPE 3PAR StoreServ 8000 Service And Upgrade Manual

Figure 81: PCM numbering, direct current, 2U SFF drive enclosure rear view
Figure 82: PCM numbering, direct current, LFF 4U drive enclosure rear view

Power distribution unit information

For a storage system that is factory integrated in an HPE rack, there are four power distribution units
(PDUs) mounted at the bottom of the rack.
For more information, see the HPE 3PAR StoreServ 8000 Storage Site Planning Manual available at the
Hewlett Packard Enterprise Information Library website:
www.hpe.com/info/storage/docs

Service processor information

The physical service processor (SP) is an optional component for the storage system that can be used
instead of a virtual service processor. The storage system supports the following physical service
processors based on whether the system is installed in either an alternating-current or direct-current
power environment:
• Alternating-current HPE ProLiant DL120 Gen9 Server
• Alternating-current HPE ProLiant DL360 Gen10 Server
• Direct-current HPE ProLiant DL360 Gen10 Server

Physical service processor information, HPE ProLiant DL120 Gen9 Server

The physical service processor can be used instead of using a virtual service processor.
106 More information