Two-Port 10 Gb Iscsi/Fcoe Cna Host Pcie Adapter Information - HPE 3PAR StoreServ 8000 Service And Upgrade Manual

Figure 52: HPE 3PAR Four-Port 16Gb FC Host Bus Adapter ports
Table 4: HPE 3PAR Four-Port 16Gb FC Host Bus Adapter ports
Port
1
2
3
4

Two-Port 10 Gb iSCSI/FCoE CNA Host PCIe Adapter information

This information applies only to the HPE 3PAR Two-Port 10Gb iSCSI/FCoE Converged Network Adapter
for the HPE 3PAR StoreServ 8000 Storage systems.
IMPORTANT: For the HPE 3PAR Two-Port 10Gb iSCSI/FCoE Converged Network Adapter, some
of the adapters have the faceplate labeling reversed, with the port on the left identified as port 2,
when oriented as in the following illustration. This illustration shows the corrected label with port 1
on the left.
Use SFP+ transceiver connectors with the ports.
Figure 53: HPE 3PAR Two-Port 10Gb iSCSI/FCoE Converged Network Adapter ports
Table 5: HPE 3PAR Two-Port 10Gb iSCSI/FCoE Converged Network Adapter ports
Port
1
2
90 More information
Node:Slot:Port (N:S:P)
N:2:1
N:2:2
N:2:3
N:2:4
Node:Slot:Port (N:S:P)
N:2:1
N:2:2