HPE 3PAR StoreServ 8000 Service And Upgrade Manual page 148

file suggested action 3
This condition might be transient because the service processor retrieves the files and cleans up the
dump directory. If the service processor (SP) is not gathering the dump files, check the condition and
state of the SP.
file example 4
Component ------Summary Description------- Qty
License An online upgrade is in progress
Component -Identifier- ------Detailed Description------
File --
file suggested action 4
Use the CLI upgradesys -status command to determine the status of the online upgrade in progress.
Use the CLI upgradesys -node <nodeID> command to reboot the next controller node shown in the
status or the CLI upgradesys -finish command to complete the upgrade after all controller nodes
have rebooted to the new version of software. Be careful with aborting or reverting an offline upgrade.
Contact the Hewlett Packard Enterprise Support Center to request support for aborting or reverting the
upgrade of your system.
fs
Displays file services health and checks the following file services items:
• Checks the health of file services and the failover/health of each storage pool.
• Checks the health of each virtual file system.
• Checks the health of the node IP addresses for file services.
• Checks the health of the file services gateway.
Format of possible fs exception messages
fs fpg "<error text>"
fs <poolname> "<poolname> is degraded: Failed over from <primaryowner> to <currentowner>"
fs <poolname> "<poolname>: <associatedMessage>. Corrective Action: <correctiveAction>
fs vfs "<error text>"
fs <server> "IP address failed to activate"
fs <server> "Missing fsip for VFS"
fs <server> "Missing cert for VFS"
fs fshareobj "<error text>"
fs <sharename> "<fpg/vfs/store/sharename>: <associatedMessage>. Corrective Action: <correctiveAction>"
fs nodeip "<error text>"
fs <nodeaddr> "<nodecuid:nodeaddr>: <associatedMessage>. Corrective Action: <correctiveAction>"
fs gw "<error text>"
fs <gatewayaddr> "<gatewayaddr>: <associatedMessage>"
fs dns "<error text>"
fs <dnssuffixlist> "<dnsaddresslist>: <associatedMessage>"
fs example
Component ---------Summary Description----------- Qty
fs File Services provisioning group issues
Component -Identifier- -------------------Detailed Description--------------------
fs fsp2
fs Suggested action
Use the CLI showfpg command to determine the state of the listed FPG. Use the CLI setfpg and
setfpg -activate commands to start the listed FPG or the CLI removefpg command to remove the
148 Troubleshooting
An online upgrade is in progress
fsp2: FPG is not activated. Corrective Action: Activate FPG
1
1