HPE 3PAR StoreServ 8000 Service And Upgrade Manual page 116

Figure 95: FC onboard ports, controller node enclosure rear view
Figure 96: FC onboard ports LEDs, controller node enclosure rear view
Table 26: FC onboard ports LEDs, controller node enclosure rear view
LED function
All ports
1 Port speed
2 Link status
SAS onboard ports LEDs
IMPORTANT: For the SAS DP2 port without an SAS cable attached, the amber LED is illuminated
and the green LED is off. This behavior is expected for the DP2 port. For the SAS DP-1 port without
an SAS cable attached, both amber and green LEDs are off.
The controller node has two SAS onboard ports (DP-1 and DP-2) and each includes two LEDs.
116 More information
Status
Off
Off
3 Fast amber flashes
4 Fast amber flashes
On
Green flashing
State
Wake up failure (dead device) or power not applied
Not connected
Connected at 8 Gb/s
Connected at 16 Gb/s
Normal/Connected—link up
Link down or not connected