HPE 3PAR StoreServ 8000 Service And Upgrade Manual page 150

Hide thumbs Also See for 3PAR StoreServ 8000:
Table of Contents

Advertisement

controller nodes, use the CLI showport command to determine if a port is offline or misconfigured. A
missing or rebooting controller node will cause a port to be offline.
cli% showvlun -v testvvActive VLUNs
Lun VVName HostName -Host_WWN/iSCSI_Name-
2 testvv testhost 10000000C9E5E0B9
cli% showhost testhost
cli% createhost -add testhost 10000000C9E5E0B8showhost testhost
ld
Checks preserved LDs.
Verifies that the current and created availability is the same.
Verifies the owner and backup.
Verifies the preserved data space (pdsld) is the same as the total data cache.
Verifies the size and number of logging LDs.
Displays LDs that are in a failed or a degraded state.
Displays LDs that are mapped to volumes.
Displays LDs that are in write-through mode.
Format of possible ld exception messages
LD ld:<ldname> "LD is not mapped to a volume"
LD ld:<ldname> "LD is in write-through mode"
LD ld:<ldname> "LD has <X> preserved RAID sets and <Y> preserved chunklets"
LD ld:<ldname> "LD has reduced availability.
LD ld:<ldname> "LD does not have a backup"
LD ld:<ldname> "LD does not have owner and backup"
LD ld:<ldname> "Logical Disk is owned by <owner>, but preferred owner is <powner>"
LD ld:<ldname> "Logical Disk is backed by <backup>, but preferred backup is <pbackup>"
LD ld:<ldname> "A logging LD is smaller than 20G in size"
LD ld:<ldname> "Detailed State:<ldstate>" (degraded or failed)
LD -- "Number of logging LD's does not match number of nodes in the cluster"
LD -- "Preserved data storage space does not equal total node's Data memory"
ld example 1
Component -------Summary Description-------- Qty
LD
LDs not mapped to a volume
Component -Identifier-- --------Detailed Description---------
LD
ld:vv.9.usr.3
ld suggested action 1
Examine the identified LDs using CLI commands such as showld, showld –d , showldmap,
showvvmap, and other such commands.
LDs are mapped to VVs. However, an LD can become disassociated from a VV for two reasons: 1) if the
VV is deleted without the underlying LDs being deleted too, and 2) if you use the aborted tune operation.
Most often you remove the unmapped LD to return its chunklets to the free pool.
150
Troubleshooting
3:1:1 host active
Current: <cavail>, Configured: <avail>"
LD is not mapped to a volume
Port Type Status ID
1
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents