System Status Leds - HPE 3PAR StoreServ 8000 Service And Upgrade Manual

LED function
4
NIC status
LED*
*When all four LEDs described in this table flash simultaneously, a power fault has occurred.

System status LEDs

This information applies only to the HPE 3PAR StoreServ 8000 Storage system. The controller node
enclosures and drive enclosures have system status LEDs at the front, left corner of the enclosures.
Figure 112: System status LEDs, left bezel ear cap, SFF enclosures front view
Table 41: System status LEDs, left bezel ear cap, SFF enclosures front view
LED Function
1
System power
System standby
2
Module fault
130 More information
Status State
Red flashing System critical
If the health LED indicates a degraded or critical state, review the
system IML or use iLO to review the system health status.
Green solid Link to network
Green flashing Network active
Off No network activity
Status
Green solid
Off
Amber solid
Amber solid
Off
State
Power
No power
Enclosure powered by the battery
Fault
No fault
Table Continued