HPE 3PAR StoreServ 8000 Service And Upgrade Manual page 129

Figure 111: Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server front view
Table 40: Physical service processor LEDs, HPE ProLiant DL360 Gen10 Server
front view
LED function Status
1
UID button/ Blue solid
LED*
Blue flashing
2
Power on/ Green solid
Standby
button and
Green flashing
power LED*
Amber solid
Off
3
Health LED* Green solid
Green flashing
Amber flashing
State
Activated
1 Hz = Remote management or firmware upgrade in progress
4 Hz = iLO manual reboot sequence initiated
8 Hz = iLO manual reboot sequence in progress
Off = Deactivated
System on
Performing power on sequence
System in standby
No power present
Facility power is not present, power cord is not attached, no power
supplies are installed, power supply failure has occurred, or the
power button cable is disconnected.
Normal
iLO is rebooting
System degraded
Table Continued
More information 129