Generating The Encryption-Based Ciphertext From The Text-Based User; Interface Of The Hpe 3Par Service Processor 5.X; Hpe 3Par Storeserv Storage System Accounts For Service - HPE 3PAR StoreServ 8000 Service And Upgrade Manual

Generating the encryption-based ciphertext from the Text-Based User Interface of the
HPE 3PAR Service Processor 5.x
Procedure
1. Connect and log in to the HPE 3PAR Service Processor (SP) 5.x.
2. From the Text-Based User Interface (TUI) main menu, enter 5 for 5 == Secure Password
Management.
The current mode is
displayed as:
Current password mode:
ENCRYPT
3. Enter either 2 for 2 == Display password blob for root or enter 3 for 3 == Display password blob
for hpesupport.
The ciphertext (blob) is displayed.
4. Copy the entire ciphertext and paste it into an email to Hewlett Packard Enterprise support or to the
approved service provider. The ciphertext is safe to email, because the random credential contained in
the ciphertext is first encrypted and then wrapped using a public key. Only Hewlett Packard Enterprise
can unwrap the encrypted credential using the corresponding private key.
When copying the ciphertext,
copy the text starting with:
- - - Begin tpd blob -
- -
and all the text ending with:
- - - End tpd blob - -
-

HPE 3PAR StoreServ Storage system accounts for service

For access to the HPE 3PAR StoreServ Storage system interfaces, there are the following account
options for the administrator or for Hewlett Packard Enterprise support personnel and authorized service
More information 83