Table of Contents
Advertisement
For more information about product features, specifications, options, configurations, and compatibility, see the product
QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/support/persistentmemoryQS).
HPE Persistent Memory module-processor compatibility
HPE Persistent Memory modules are supported only in graphics expansion modules with second-generation Intel Xeon
Scalable processors installed.
Configuring the graphics expansion module for HPE Persistent Memory
After installing HPE Persistent Memory modules, configure the graphics expansion module for HPE Persistent Memory.
IMPORTANT: Always follow recommendations from your software application provider for high-availability best
practices to ensure maximum uptime and data protection.
A number of configuration tools are available, including:
•
UEFI System Utilities—Access System Utilities through the Remote Console to configure the graphics expansion module by
pressing the F9 key during POST.
•
iLO RESTful API—Use the iLO RESTful API through tools such as the RESTful Interface Tool (ilorest) or other third-party
tools.
•
HPE Persistent Memory Management Utility—The HPE Persistent Memory Management Utility is a desktop application
used to configure the graphics expansion module for HPE Persistent Memory, as well as evaluate and monitor the graphics
expansion module memory configuration layout.
For more information, see the HPE Persistent Memory User Guide on the Hewlett Packard Enterprise website (http://
www.hpe.com/info/persistentmemory-docs).
HPE Persistent Memory module relocation guidelines
Observe the relocation guidelines when doing the following:
•
When relocating HPE Persistent Memory modules to another DIMM slot on the graphics expansion module.
•
When relocating HPE Persistent Memory modules to another graphics expansion module.
•
When reinstalling HPE Persistent Memory modules after replacing the graphics expansion module system board.
IMPORTANT: When data must be preserved, Hewlett Packard Enterprise strongly recommends that you perform a
manual backup of all user data on the HPE Persistent Memory modules before changing the goal configuration or
performing relocation procedures.
Requirements for relocating HPE Persistent Memory modules or a set of HPE Persistent Memory modules when the data
must be preserved
•
The destination graphics expansion module hardware must match the original graphics expansion module hardware
configuration.
•
All System Utilities settings in the destination graphics expansion module must match the original System Utilities settings
in the original graphics expansion module.
•
If HPE Persistent Memory modules are used with Persistent Memory Interleaving set to Enabled in the original graphics
expansion module, do the following:
Removal and replacement procedures
66
Advertisement
Table of Contents
