HPE 3PAR StoreServ 8000 Service And Upgrade Manual page 77

Prerequisites
From the HPE 3PAR Service Processor (SP) software in the Support settings, verify that the Send
support data to HPE option (call-home feature) is enabled.
For more information about the HPE 3PAR Service Processor software settings, see the HPE 3PAR
Service Processor Software 5.0.x User Guide available at the Hewlett Packard Enterprise Information
Library website:
www.hpe.com/info/storage/docs
Procedure
1. Connect to the HPE InfoSight web portal: infosight.hpe.com
2. Log in using the credentials for your HPE Passport account.
3. Select Register Systems from the settings menu (gear icon).
4. From the Register Systems page, select a previously created system group or create a system
group, and then click I Accept to agree you are registering one or more systems that you own or
administer.
To create a system group, select the Create New Group option from the drop-down menu.
5. Copy the generated registration token to your clipboard by clicking the clipboard button located to the
left of the field containing the token.
This token is text beginning with StoreFrontRemoteAccess and will be pasted into a Token field in
the Main Console interface.
6. From the server on which the HPE 3PAR SSMC software is installed, access the Main Console:
a. Browse to https://<IP address or FQDN>:8443.
TIP: The default port number is 8443. Another port might have been assigned during
installation of the software.
The login screen opens.
b. Enter a user name and password, make sure the check box for Administrator Console is clear,
and then click Login.
The Dashboard screen is displayed.
7. From the Main Console interface dashboard, complete the following steps:
a. From the main menu under Storage Systems, click Systems.
b. Select the storage system from the list pane view.
c. From the detail pane view for that system, hover over the General detail area, and then click the
edit icon ( ) that appears near the panel name.
d. Scroll down to the Descriptors section, and then paste the token in the Comments field.
With this token added, the next time the storage system calls home, StoreFront Remote will see the
storage system and associate it with the corresponding group. This process can take 24–48 hours.
More information 77