Controller Node Leds - HPE 3PAR StoreServ 8000 Service And Upgrade Manual

Controller node LEDs

This information applies only to the controller nodes for the HPE 3PAR StoreServ 8000 Storage system.
IMPORTANT: The controller nodes in the controller node enclosure are inverted 180° from each
other, as well as the ports.
Figure 92: Controller node LEDs, controller node enclosure rear view
Table 24: Controller node LEDs, controller node enclosure rear view
LED Function
Status
UID/Service
Fault
Ethernet onboard ports LEDs, controller node enclosure rear view
The controller node has two Ethernet onboard (built-in) ports:
• MGMT—Onboard port for the network connection
• RC-1—Onboard port for an HPE 3PAR Remote Copy or HPE 3PAR File Persona connection
114 More information
Status
Green solid
Green rapid flashing
Green slow flashing
Blue solid
Blue flashing
Off
Amber solid
Amber flashing
Off
State
Not a cluster member
• Booting
• Shutdown (halted)
Cluster member and flashes slowly in
synchronization with the other controller
nodes in the cluster
Shutdown (halted); not a cluster member;
can be removed
Locate active; do not remove component
Locate not active
Fault
In the cluster, one of the other controller
nodes is shut down (halted).
No fault