Table of Contents
Advertisement
Operating Instructions
4.22 Read Status
Read Status functions do not require a password. The control panel will continue to provide fire
protection while in Read Status mode. This mode can be entered while the control panel is in alarm
or trouble. If a new alarm or trouble occurs during these functions, the Read Status is exited to
prevent confusion.
Read Status Entry
When the operator presses the control panel Enter key, the LCD will display the following:
Pressing 1, while this screen is being displayed, will cause the control panel to enter the Read
Status mode which allows the user to view and print the programmed features and status of the
control panel.
The following screens will be displayed:
READ STATUS
1=SYSTEM POINT
2=ZONES
3=POWER
Read Status Screen #1
READ STATUS
1=TROUBLE REMINDER
2=TIMERS
3=NACS
Read Status Screen #2
READ STATUS
1=RELAYS
2=PROGRAM CHECK
3=HISTORY
Read Status Screen #3
140
1=READ STATUS MODE
2=PROGRAMMING MODE
3=MANUAL DIAL MODE
1=ANNUNCIATORS
2=PHONE LINE
3=CENTRAL STATION
1=SERVICE TERMINAL
2=PRINTER/PC
3=PRINT
1=TIME-DATE
READ STATUS
Read Status Screen #4
READ STATUS
Read Status Screen #5
READ STATUS
Read Status Screen #6
MS-9200UDLS PN 52750:A 11/04/05
Read Status
Advertisement
Table of Contents
