Table of Contents
Advertisement
®
R&S
NGE100B
Figure 5-19: Digital IO dialog
2. Select the desired DIO interface.
3. Select "Trigger In" to accept external trigger signal or "Trigger Out" to output the
trigger signal.
4. Set the desired channel.
5. Select the desired trigger condition.
See
6. Set the desired "Logic" state.
7. Set the status to "Enabled".
The R&S NGE100B enabled the selected DIO interface and monitor or feedback
the trigger condition onto the selected channel.
5.6 Connecting to a Network
5.6.1 LAN Connection
R&S NGE-K101 (order number: 5601.2204.03) option is required to connect the R&S
NGE100B to a network via LAN connection.
There are two methods to establish a local area network (LAN) connection with the
R&S NGE100B for remote control operation.
5.6.1.1
Wired Connection
The network card can be operated with a 10 Mbps Ethernet IEEE 802.3 or a 100 Mbps
Ethernet IEEE 802.3u interface.
User Manual 5601.1343.02 ─ 04
Table 5-11
and
Table
5-12.
Instrument Functions
Connecting to a Network
49
Advertisement
Table of Contents
