Table of Contents
Advertisement
®
R&S
NGE100B
6.9 Interfaces and protocols
There are various of ways how the R&S NGE100B can be remotely accessed and con-
trolled.
Access:
1. Press [Menu] key.
2. Select "Interface" menu item to configure the required interface.
The R&S NGE100B displays the available interface options.
6.9.1 Network connection
To establish a local area network (LAN) connection with the R&S NGE100B for remote
control operation.
●
LAN
●
Wireless LAN
6.9.1.1
LAN connection
Instrument option
R&S NGL-K101 (P/N: 5601.2204.03) option is required to connect the R&S NGE100B
to a network via LAN connection.
The R&S NGE100B is equipped with a network interface and can be connected to an
Ethernet LAN (local area network). A LAN connection is necessary for remote control
of the instrument, and for access from a computer using a web browser.
Risk of network failure
Before connecting the instrument to the network or configuring the network, consult
your network administrator. Errors may affect the entire network.
To establish a network connection, connect a commercial RJ-45 cable to the LAN port
of the instrument and to a PC or network switch.
Depending on the network capacities, the TCP/IP address information for the instru-
ment can be obtained in different ways.
●
If the network supports dynamic TCP/IP configuration using the Dynamic Host
Configuration Protocol (DHCP), and a DHCP server is available, all address infor-
mation can be assigned automatically.
User Manual 5601.1343.02 ─ 09
Instrument functions
Interfaces and protocols
54
Advertisement
Table of Contents
