GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 86

Pneumatic Cover Removal: FF and High Flow
To remove the FF pneumatic cover:
1. Using a 3 mm hex key, remove the six screws from around the perimeter of the cover
2. Lift the cover off and put aside for re-installation.
To remove the FF High Flow pneumatic cover:
1. Using a 3 mm hex key, remove the four screws from around the perimeter of the cover
(Figure 42 or Figure 43).
2. Lift the cover off and put aside for installation.
Pneumatic Cover Removal
To remove the pneumatic cover:
1. Using a 3 mm hex key, remove the six screws from around the perimeter of the cover
2. Lift the cover off and put aside for re-installation.
86 |
BHGE
Figure 42 Pneumatic Cover Screws: High Flow
Figure 43 Pneumatic Cover Screws: FF (Four Shown)
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.