GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 226

View3: Dynamic analog values related to the valve
position control
VIEW3.1: Values related to the Discrete Inputs and
Outputs in the device
View3.2: Values related to the errors detected in the
device
View3.3: Provides histogram data
View3:4: Extremes reached in the device since
power up
226 |
BHGE
Table 34 VIEWS (Continued)
View Values
1 ST_REV
12 FINAL_VALUE
17 FINAL_POSITION_VALUE
23 WORKING_SP
24 WORKING_POS
49 SUPPLY_PRESSURE
54 ACTUATOR_A_PRESSURE
55 ACTUATOR_B_PRESSURE
56 ATMOSPHERIC_PRESSURE
57 PILOT_PRESSURE
60 TEMPERATURE
63 IP_DRIVE_CURRENT
90 SETPOINT
91 ACTUAL_POSITION
1 ST_REV
72 FAILED_STATE
73 FINAL_VALUE_D
74 FINAL_POSITION_VALUE_D
75 FINAL_VALUE_DINT
76 FINAL_POSITION_VALUE_DINT
77 DISCRETE_OUTPUT_1_STATE
78 DISCRETE_OUTPUT_2_STATE
79 DISCRETE_INPUT
1 ST_REV
5 MODE_BLK MODE_BLK
6 BLOCK_ERR
11 XD_ERROR_POS
48 XD_ERROR_PRESSURE
61 XD_ERROR_TEMPERATURE
86 APP_MODE
87 COMPLETE_STATUS
94 ALERT_STATE
95 ALERT_COUNTERS
37 POSITION_HISTOGRAM
39 POSITION_ERROR_HISTOGRAM
111 POSITION_EXTREMES
112 PRESSURE_EXTREMES
113 TEMPERATURE_EXTREMES
114 IP_CURRENT_EXTREMES
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.