GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 189

Parameter (in bold)
Sub-parameter (Index)
Cycle Counter B Alert
(11)
Working Time Alert (12)
Supply Pressure HI Alert
(13)
Supply Pressure Lo
Alert (14)
Supply Pressure LOLO
Alert (15)
Temperature HI Alert
(16)
Temperature LO Alert
(17)
IP Drive Current Alert HI
(18)
IP Drive Current Alert
LO (19)
Sensor Failure Alert (20)
Processor Alert (21)
Valve Control Alert (22)
Commissioning Alert
(23)
Air Supply Alert (24)
Supporting
Hardware Alert (25)
ALERT_LOG (97)
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Table 31 Transducer Block Parameters (Continued)
Initial
Mode
Range
Value
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
0 - 0 Any
0xFFFF
Description
How many times the Cycle Counter B alert is detected.
How many times the Working Time alert is detected.
How many times the Supply Pressure HI alert is detected.
How many times the Supply Pressure LO alert is detected.
How many times the Supply Pressure LOLO alert is
detected.
How many times the Temperature HI alert is detected.
How many times the Temperature LO alert is detected.
How many times the IP Drive Current HI alert is detected.
How many times the IP Drive Current LO alert is detected.
How many times the Sensor Failure alert is detected.
How many times the Processor alert is detected.
How many times the Valve Control alert is detected.
How many times the Commissioning alert is detected.
How many times the Air Supply alert is detected.
How many times the Supporting Hardware alert is
detected.
Used by the DTM only.
Access alert logs from the device.
Masoneilan SVI FF Instruction Manual
| 189
=