GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 212

B. Setting System Management and Network Management Parameters
Configure the FF communication parameters to provide reliable communication between the
host and devices connected to the segment. Set the communication parameters once and
you do not need to change them when additional devices (positioners) are connected to the
segment.
Figure 72 provides the values that are used during the device registration and interoperability
testing (see FF specification document FF-940 FS 1.5 - Communication Profile chapter 5.4
Default link settings for communication parameters on H1_31_25kbps Physical Layer networks).
Figure 72 Default Link Settings for Communication Parameters on H1_31_25kbps Physical Layer
Networks
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
212 |
BHGE