SVI FF High Flow
The single acting pneumatic relay amplifies the pressure from the I/P and increases airflow as
required for stable, responsive, actuator performance. The single acting relay operates on any
supply pressure that is at least 5 psi (.345 bar, 34.5 kPa) above the required actuator pressure,
up to 150 psi (10.3 bar, 1034 kPa).
Figure 4 SVI FF High Flow Pneumatic Module with Single Acting Relay
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
IP Current to Pneumatic Converter
Vent
Relay
(Pneumatic Amplifier)
Masoneilan SVI FF Instruction Manual
| 27
=