GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 150

Parameter (in bold)
Sub-parameter (Index)
Number of Parameters
(9)
NEXT_FB_TO_EXECUTE
(10)
VIEWS_INDEX (11)
NUMBER_VIEW_3 (12)
NUMBER_VIEW_4 (13)
ST_REV (15)
TAG_DESC (2)
STRATEGY (3)
ALERT_KEY (4)
MODE_BLK (5)
TARGET (1)
ACTUAL (2)
PERMITTED (3)
NORMAL (4)
BLOCK_ERR (6)
UPDATE_EVT (7)
UNACKNOWLEDGED (1)
150 |
BHGE
Table 31 Transducer Block Parameters (Continued)
Initial
Mode
Range
Value
120
0
20010
6
5
1-0xFFFF 0
0
[1, 255] 0
See Auto
Descrip-
tion
Auto,
MAN,
OOS
Auto
Description
Number of parameters in the block.
Next block for execution. Not used in this application.
Starting index of the views.
1 - Indicates how many View3s are used. See "Views" on
page 225.
1 - Indicates how many View4s are used. "Views" on
page 225.
The revision level of the static data associated with the
function block.
The user description of the intended application of the
block.
The strategy field can be used to identify grouping of
blocks. This data is not checked or processed by the block.
The identification number of the plant unit. This informa-
tion may be used in the host for sorting alarms, etc.
Limited to set only one of the PERMITTED modes.
See "Block Modes" on page 20.
Reflects the actual block mode for the device.
See "Block Modes" on page 20.
The following is the list of permitted bit values:
0x80 - Out of Service mode
0x10 - Manual
0x04 - Auto mode
All other bits are filtered and ignored.
This alert is generated by any change to the static data.
Update event is generated each time a static parameter
attribute value is changed.
Standard FF alarm behavior.
0 = Undefined.
1 = Acknowledged.
2 = Unacknowledged.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.