Display and Clear Error Messages
Use this procedure, VIEW ERR, to view fault codes and messages listed in Table 30 of this
manual.
1. Press + in NORMAL mode to move through the options until you reach the VIEW ERR menu
item.
2. Press * to go to VIEW ERR menu.
3. Press * to display the list of status values.
4. Press + to move forward trough the list in sequence.
5. Press – to move back through the list.
6. Press * at any status message to return to the VIEW ERR option.
7. Press + to move to Clear ERR.
8. Press * to clear all messages.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
| 147
Masoneilan SVI FF Instruction Manual
=