Appendix G. Static Parameters During Restore To Defaults - GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual

Appendix G. Static Parameters During Restore to
Defaults
Table 32 lists the parameters that don't change when restore with defaults is invoked in the
Resource block.
Index
14 POSITION_LIMITS
15 FINAL_VALUE_CUTOFF_HI
16 FINAL_VALUE_CUTOFF_LO
19 ACTIVE_CONTROL_SET
22 TRAVEL CALIBRATION
33 TRAVEL_ACCUMULATION_TREND
36 CYCLE_COUNTER_TREND
37 POSITION_ERROR_TREND
38 POSITION_HISTOGRAM
40 POSITION_ERROR_HISTOGRAM
43 CHAR_SELECTION
44 CURRENT_CHAR_POINTS
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Table 32 Static Parameters
Parameter Name Index Parameter Name
51 PRESSURE_RANGE
82 DISCRETE_SWITCH_1_CONF
83 DISCRETE_SWITCH_2_CONF
84 UI_ACCESS_CONTROL
85 UI_LANGUAGE
89 OPEN_STOP_ADJUSTMENT
94 ALERT_ACTION
96 ALERT_COUNTERS
97 ALERT_LOG
99 WORKING_TIME_ALERT
104 ACTUATOR_3
113 ACCESSORY
Masoneilan SVI FF Instruction Manual
| 197
=