GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 164

Parameter (in bold)
Sub-parameter (Index)
THREE_DAYS_AGO (5)
CURRENT_WEEK (6)
LAST_WEEK (7)
PREVIOUS_WEEK (8)
THREE_WEEKS_AGO (9)
CURRENT_MONTH (10)
LAST_MONTH (11)
PREVIOUS_MONTH (12)
THREE_MONTHS_AGO
(13)
CURRENT_12_MONTHS
(14)
LAST_12_MONTHS (15)
PREVIOUS
_12_MONTHS (16)
THREE_YEARS_AGO (17)
POSITION_
HISTOGRAM (38)
TOTAL_TIME (1)
5%-CLOSED (2)
164 |
BHGE
Table 31 Transducer Block Parameters (Continued)
Initial
Mode
Range
Value
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Description
Position Error for the previous full 24 hours period.
No value for Standard Diagnostics version.
Position Error for the current week.
No value for Standard Diagnostics version.
Position Error for the last full week.
No value for Standard Diagnostics version.
Position Error for the previous week (2 weeks ago).
No value for Standard Diagnostics version.
Position Error 3 weeks ago.
No value for Standard Diagnostics version.
Position Error for the current month period.
No value for Standard Diagnostics version.
Position Error for the last full month period.
No value for Standard Diagnostics version.
Position Error for the previous full month period.
No value for Standard Diagnostics version.
Position Error 3 months ago.
No value for Standard Diagnostics version.
Position Error for the current 12 month period.
No value for Standard Diagnostics version.
Position Error for the last full 12 months.
No value for Standard Diagnostics version.
Position Error for the previous full 12 months.
No value for Standard Diagnostics version.
Position Error 3 years ago.
No value for Standard Diagnostics version.
An array of counters that count how many macro cycles
the valve was in different position segments. The counters
should increase only if the device is under control - the
transducer block is in AUTO mode and the quality of the
set point is GOOD.
No value for Standard Diagnostics version.
Total Working time in seconds or time since the reset to
the values in the histogram.
No value for Standard Diagnostics version.
Macrocyles in the range from closed to 5%.
No value for Standard Diagnostics version.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.