Output Switch - GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual

Temperature Sensor
A temperature sensor is located in the electronics module and measures ambient
temperature. This measurement is used to provide temperature compensation for the
position and pressure sensors and other internal electronic components. The temperature is
read via the FF communication link to provide a warning of excessive ambient temperature at
the positioner.

Output Switch

The SVI FF supports a contact output, SW #1 (Discrete Output switch), that can be logically
linked to status bits. The Discrete Output switch terminal is a solid state contact. The switch
requires its own power source and must be connected to the appropriate connector on the
Electronics Module Terminal Board. See "Output Switches" on page 67.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Masoneilan SVI FF Instruction Manual
| 25
=