Viewing Firmware Versions - GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual

Viewing Firmware Versions

Firmware versions can be viewed using the:
SVI FF DTM on the Positioner tab. The firmware revision is Software Revision (Figure 45).
Where the first digit, here 1, represents the DD Revision.
Figure 45 Positioner Tab
By creating/printing the SVI FF Configuration Report by:
1. Selecting View > Network View > Topology Pane.
2. Selecting the positioner, right-clicking and selecting Additional Functions > Report.
Handheld by selecting Online > SVI FF Device > Resource Block > Device >
Identification.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
90 |
BHGE