GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 159

Parameter (in bold)
Sub-parameter (Index)
ALERT_POINT (2)
DEADBAND (3)
ALERT (4)
HISTORIC ALERT (5)
ENABLE (6)
TRAVEL_
ACCUMULATION_
A_ALERT (31)
TRAVEL_
ACCUMULATION (1)
ALERT_POINT (2)
DEADBAND_AB (3)
ALERT (4)
HISTORIC ALERT (5)
ENABLE (6)
TRAVEL_
ACCUMULATION_
B_ALERT (32)
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Table 31 Transducer Block Parameters (Continued)
Initial
Mode
Range
Value
-51 to -10
199
0.1-10 1
0 0
0 0
0 TRUE
0
0-0xFFFF 1Milion
FFFF
0.1-10 1
0 0
0 0
0 TRUE
Description
POSITION Value, below which the ALERT is set to True.
Should be set below POSITION_LO_ALERT.ALERT_POINT.
POSITION change, required to clear the ALERT, once it was
set to True.
True if the position has reached below ALERT_POINT and
have not come above (ALERT_POINT+DEADBAND).
True if ALERT is true.
Not Changed if ALERT is false.
True - Enables the ALERT to be reported according to the
configuration.
False - Disables ALERT reporting.
Not writable for Standard Diagnostics version.
Totalized change in travel, since the TRAVEL_ACCUMULA-
TION was cleared. The value increments when the magni-
tude of the change exceeds the DEADBAND.
Not writable for Standard Diagnostics version.
Travel accumulation value, above which the ALERT is set
to True.
Not writable for Standard Diagnostics version.
POSITION change, required to exceed, before the TRAVEL
ACCUMULATION is increased.
Not writable for Standard Diagnostics version.
True if the TRAVEL_ACCUMULATION is above
ALERT_POINT.
Not writable for Standard Diagnostics version.
True if ALERT is true.
Not changed if ALERT is false.
Not writable for Standard Diagnostics version.
True - Enables the ALERT to be reported according to the
configuration.
False - Disables ALERT reporting.
Not writable for Standard Diagnostics version.
Not writable for Standard Diagnostics version.
Masoneilan SVI FF Instruction Manual
| 159
=