GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 172

Parameter (in bold)
Sub-parameter (Index)
HISTORIC ALERT (5)
ENABLE (6)
ACTUATOR_A_
PRESSURE (55)
STATUS (1)
VALUE (2)
ACTUATOR_B_
PRESSURE (56)
STATUS (1)
VALUE (2)
ATMOSPHERIC_
PRESSURE (57)
STATUS (1)
VALUE (2)
PILOT_PRESSURE (58)
STATUS (1)
VALUE (2)
TEMP_
TRANSDUCER_TYPE
(59)
XD_ERROR_
TEMPERATURE (60)
TEMPERATURE (61)
STATUS (1)
VALUE (2)
TEMPERATURE_HI_
ALERT (62)
172 |
BHGE
Table 31 Transducer Block Parameters (Continued)
Initial
Mode
Range
Value
True - FALSE
False
True - TRUE
False
101 101
0 0
Description
True if ALERT is true.
Not Changed if ALERT is false.
Not writable for Standard Diagnostics version.
True - Enables the ALERT to be reported according to the
configuration.
False - Disables ALERT reporting.
Not writable for Standard Diagnostics version.
The actual control pressure and status.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
The actual control pressure and status. Valid for double
acting valves.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
The actual Atmospheric pressure and status.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
The actual pilot pressure and status.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
Standard Temperature.
Temperature Transducer Error
22 I/O Failure
The actual temperature measured by actuator electronics.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
No value for Standard Diagnostics version.
High temperature alert.
Not writable for Standard Diagnostics version.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.