GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 201

Table 33 lists the position and travel settings as reference.
FF Parameter
LIMITS_PROTECTED set to
FALSE
ENABLE_HI
ENABLE_LO
FINAL_VALUE_CUTOFF_HI
FINAL_VALUE_CUTOFF_LO
FINAL_VALUE_CUTOFF_HI.
ENABLE
FINAL_VALUE_CUTOFF_HI.
CUTOFF_POINT_HI
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Figure 66 Position Limits versus Setpoint Limit
Table 33 Position and Travel Settings
SVI FF DTM Field
Position Limits Protected
checkbox.
Position Limits HI Enabled
checkbox.
Position Limits LO Enabled
checkbox.
Position Limits HI field.
Position Limits LO field.
Cut-Offs Full Open Enabled
checkbox.
Cut-Offs Full Open Above field.
Description
Enables editing of the limits.
Enables the LIMIT_HI parameter.
Enables the LIMIT_LO parameter.
Use this field to enter the value.
Use this field to enter the value.
Enables the
FINAL_VALUE_CUTOFF_HI.CUTOFF_POINT_HI
field.
If the FINAL_VALUE is more positive than this
value, the valve is forced to its maximum high
value (fully opened).
Masoneilan SVI FF Instruction Manual
| 201
=