GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 187

Parameter (in bold)
Sub-parameter (Index)
Deviation Alert (1)
Position HIHI Alert (2)
Position HI Alert (3)
Position LO Alert (4)
Position LOLO Alert (5)
Set Point Timeout Alert
(6)
Near Close Alert (7)
Travel
Accumulation A Alert (8)
Travel
Accumulation B Alert (9)
Cycle Counter A Alert
(10)
Cycle Counter B Alert
(11)
Working Time Alert (12) T/F
Supply Pressure HI Alert
(13)
Supply Pressure LO
Alert (14)
Supply Pressure LOLO
Alert (15)
Temperature HI Alert
(16)
Temperature LO Alert
(17)
IP Drive Current Alert HI
(18)
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Table 31 Transducer Block Parameters (Continued)
Initial
Mode
Range
Value
T/F F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
T/F F Any
Description
Provides the current state of the Alert condition:
TRUE: Alert condition is active.
FALSE: Alert condition does not exist.
Provides the current state of the Position HIHI alert condi-
tion.
Provides the current state of the Position HI alert condi-
tion.
Provides the current state of the Position LO alert condi-
tion.
Provides the current state of the Position LOLO alert condi-
tion.
Provides the current state of the Set Point Timeout alert
condition.
Provides the current state of the Near Close alert condi-
tion.
Provides the current state of the Travel Accumulation A
alert condition.
Provides the current state of the Travel Accumulation B
alert condition.
Provides the current state of the Cycle Counter A alert
condition.
Provides the current state of the Cycle Counter B alert
condition.
Provides the current state of the Working Time alert con-
dition.
Provides the current state of the Supply Pressure HI alert
condition.
Provides the current state of the Supply Pressure LO alert
condition.
Provides the current state of the Supply Pressure LOLO
alert condition.
Provides the current state of the Temperature HI alert con-
dition.
Provides the current state of the Temperature LO alert
condition.
Provides the current state of the IP Drive Current HI alert
condition.
Masoneilan SVI FF Instruction Manual
| 187
=