Lantronix SGX 5150 Command Reference Manual page 96

show history
write
device (device) level commands
auto show tlog
clrscrn
cp functions
default long name
default short name
exit
long name <name>
reboot schedule
short name <name>
show
show hardware infor-
mation
show history
show lines
show memory
show task state
show tlog
write
dhcpserver (config-dhcpd) level commands
clrscrn
default end ip address
default end ipv6 address Clears the end IPv6 address of DHCP address pool.
default lease time
default start ip address
default start ipv6 address Clears the start IPv6 address of DHCP address pool.
delete all static leases
delete static lease <in-
stance>
dhcp relay disable
dhcp relay enable
dhcp server ip address
<IP address>
end ip address <IP ad-
dress>
end ipv6 address <ipv6
address/prefix>
ipv6 state disable
ipv6 state enable
lease time <hours>
no dhcp server ip ad-
SGX™ 5150 IoT Device Gateway Command Reference
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
Continuously displays the internal trouble log.
Clears the screen.
Enters the cp functions level
Restores the default product long name.
Restores the default product short name.
Exit to the enable level.
Sets the product long name, displayed in command mode and the Web interface.
Enters the reboot schedule level
Sets the product short name, displayed in command mode and the Web interface. <name>
= maximum of eight characters.
Show system information
Displays information about the hardware.
Displays the last 20 commands entered during the current CLI session.
Show line information
Displays current memory usage information.
Displays current task states.
Displays the internal trouble log.
Stores the current configuration in permanent memory.
Clears the screen.
Restores end IP address of DHCP address pool to the default value.
Restores the lease time to default value (24 hours).
Restores start IP address of DHCP address pool to the default value.
Deletes all static leases.
Deletes an entry from the static lease table <instance> = index of the entry being removed
Disables DHCP server relay mode.
Enables DHCP server relay mode.
Sets the IP address of DHCP server.
Sets the end IP address of DHCP address pool.
Sets the end IPv6 address of DHCP address pool. IPv6 addresses are written in eight
groups of four hexadecimal digits separated by colons, such as
2001:0db8:85a3:0000:0000:8a2e:0370:7334 Network address ranges are written in CIDR
notation. A network is denoted by the first address in the block (ending in all zeroes), a
slash (/), and a decimal value equal to the size in bits of the prefix
Disables IPv6 DHCP server.
Enables IPv6 DHCP server.
Sets the lease time. <number> = lease time in hours.
Clears the IP address of DHCP server.
5: Commands and Levels
96