Lantronix SGX 5150 Command Reference Manual page 369

show
show history
show local rsa key
show logs
show status
state disable
state enable
type transport
type tunnel
unreachable host detec-
tion
username <text>
vpn <instance>
write
wep (config-profile-security-wep:default_infrastructure_profile) level commands
apply wlan
authentication open
authentication shared
clrscrn
default authentication
default key size
default tx key index
exit
key <instance>
key size 104
key size 40
show
show history
tx key index 1
tx key index 2
tx key index 3
tx key index 4
write
wlan profiles (config-profiles) level commands
apply wlan
clrscrn
create <profile name>
delete <profile name>
edit <profile name>
exit
show
show history
write
SGX™ 5150 IoT Device Gateway Command Reference
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Show Local RSA key
Show logs
Show VPN status
Disables VPN tunnel.
Enables VPN tunnel.
Sets the transport type to transport.
Sets the transport type to tunnel.
Enters the next lower level.
Sets the username. <text> = username.
Change to vpn level.
Stores the current configuration in permanent memory.
Try out WLAN settings without saving them to Flash. If the settings do not work, when you
reboot the device, it will still have the original settings.
Sets the type of authentication to open.
Sets the type of authentication to shared.
Clears the screen.
Restores the authentication type to the default value (open).
Restores the key size to the default value (40 bits).
Restores the tx key index to the default value (1).
Exits to the next higher level.
Enters the next lower level. Specify the instance for the next lower level.
Sets the key size to 104 bits.
Sets the key size to 40 bits.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Selects key 1 for transmission encryption.
Selects key 2 for transmission encryption.
Selects key 3 for transmission encryption.
Selects key 4 for transmission encryption.
Stores the current configuration in permanent memory.
Try out WLAN settings without saving them to Flash. If the settings do not work, when you
reboot the device, it will still have the original settings.
Clears the screen.
Create a new profile name
Delete existing profile by name
View or edit an existing profile
Exits to the config level.
Show existing profile names
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
5: Commands and Levels
369