Lantronix SGX 5150 Command Reference Manual page 319

action accept
action drop
clrscrn
default action
exit
mac address <hexadec-
imal>
mac address filter <num-
ber>
no mac address
show
show history
write
mac address filter 6 (config-mac_filter:6) level commands
action accept
action drop
clrscrn
default action
exit
mac address <hexadec-
imal>
mac address filter <num-
ber>
no mac address
show
show history
write
mac address filter 7 (config-mac_filter:7) level commands
action accept
action drop
clrscrn
default action
exit
mac address <hexadec-
imal>
mac address filter <num-
ber>
no mac address
show
show history
write
mac address filter 8 (config-mac_filter:8) level commands
action accept
action drop
SGX™ 5150 IoT Device Gateway Command Reference
Sets the action to ACCEPT.
Sets the action to DROP.
Clears the screen.
Restores the default value of action (ACCEPT).
Exits to the config-gateway level.
Sets the filter MAC Address. Each byte is represented by two adjacent hex digits. Bytes
may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC
12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces.
Change to config mac filter level.
Removes the filter MAC Address.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
Sets the action to ACCEPT.
Sets the action to DROP.
Clears the screen.
Restores the default value of action (ACCEPT).
Exits to the config-gateway level.
Sets the filter MAC Address. Each byte is represented by two adjacent hex digits. Bytes
may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC
12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces.
Change to config mac filter level.
Removes the filter MAC Address.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
Sets the action to ACCEPT.
Sets the action to DROP.
Clears the screen.
Restores the default value of action (ACCEPT).
Exits to the config-gateway level.
Sets the filter MAC Address. Each byte is represented by two adjacent hex digits. Bytes
may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC
12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces.
Change to config mac filter level.
Removes the filter MAC Address.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
Sets the action to ACCEPT.
Sets the action to DROP.
5: Commands and Levels
319