Download Print this page
Lantronix G526 Quick Start Manual

Lantronix G526 Quick Start Manual

Iot cellular gateway

Advertisement

Quick Links

G526 Quick Start Guide
!
Thank you for choosing Lantronix. Please register your product to receive notifications for firmware and
documentation updates at www.lantronix.com/product-registration.
G526
Model shown: G526GP1AS
HARDWARE OVERVIEW
Front View
*Wi-Fi
RS-232
USB
*Antenna selection will vary depending on your needs.
HARDWARE SETUP
1.
Unbox and verify the contents. Gather the accessories that you will need.
2.
Remove the SIM card from its packaging. Locate the SIM 1 slot on the unit.
To insert the SIM card, slide the latch for SIM 1 slot to the left and gently
push the SIM card (contact side down) all the way into the slot. Release the
latch.
Note: The SIM card is pre-activated by Lantronix, but the APN may need to be
configured in the software. See Quick Setup.
3.
Attach the cellular / GNSS antennas to the antenna connectors and tighten
them securely.
4.
Optional: To enable Last Gasp, slide the battery switch to the left (ON).
5.
Attach the Wi-Fi / Bluetooth antennas to the antenna connectors and tighten
them securely. If you're using only Bluetooth, attach one antenna to the Wi-
Fi / Bluetooth connector.
6.
Connect the power cord to the power supply. Attach the 3-pin plug on the
power cord to the DC input on the unit. Connect the AC plug on the power
supply to a standard AC receptacle.
7.
Observe that the Power LED is lit.
WHAT'S IN THE BOX
guides
Quick
Start
Guide
SIM
Insert
LEDs
Ethernet (LAN,
WAN/LAN #2)
DC input
**RS-485
*Wi-Fi /Bluetooth
**I/O connectors
Accessory
Power cord
SIM card
Accessories including antennas, power supplies, adapters, and cables
are not included and are sold separately. For available accessories,
visit
https://www.lantronix.com/products/g520/
*Cellular
diversity
**3-pin and 5-pin MICRO COMBICON plugs shown in the picture are sold separately.
Alert
User
Programmable 1
User
Programmable 2
Activity
Network
Signal
SIM
Wi-Fi
Power
1
IoT Cellular Gateway
Part number
ACC-500-0420-00
N/A
Back View
SIM 1
SIM 2
microSD
*GNSS
Last Gasp
LEDs
Red
Device alerts
Blue
Software configurable
Blue
Software configurable
Amber
Cellular data activity
Amber
Cellular network status
Amber
Cellular signal strength
Blue
SIM in use
Blue
Wi-Fi network status
Green
Power On or Off
quantity
1
1
*Cellular
main

Advertisement

loading

Summary of Contents for Lantronix G526

  • Page 1 G526 Quick Start Guide IoT Cellular Gateway Thank you for choosing Lantronix. Please register your product to receive notifications for firmware and documentation updates at www.lantronix.com/product-registration. WHAT’S IN THE BOX G526 guides Accessory Part number quantity Power cord ACC-500-0420-00 Quick...
  • Page 2 For support links and the latest firmware and documentation, visit https://www.lantronix.com/support © 2021 Lantronix, Inc. Lantronix is a registered trademark of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to change without notice. 895-0049-00 Rev. A...

This manual is also suitable for:

G526gp1as