Lantronix SGX 5150 Command Reference Manual page 95

show history
url <text>
username <text>
write
connection 2 (config-action-ftp_put-connection:eth0 link state change:2) level commands
clrscrn
default filename
default local port
default port
default protocol
default username
exit
filename <text>
host <text>
local port <number>
no host
no password
password <text>
port <number>
protocol ftp
protocol ftps
show
show history
username <text>
write
cp functions (device-cp-functions) level commands
clrscrn
exit
reset to factory defaults
cp disable
reset to factory defaults
cp enable
show
show history
wps pushbutton cp disa-
ble
wps pushbutton cp ena-
ble
write
credentials (ssl-credentials) level commands
clrscrn
create <credential name> Create a new credential name
delete <credential name> Delete existing credential by name
edit <credential name>
exit
show
SGX™ 5150 IoT Device Gateway Command Reference
Displays the last 20 commands entered during the current CLI session.
Sets HTTP request URL following IP address or hostname.
Sets the Username used to logon to HTTP server.
Stores the current configuration in permanent memory.
Clears the screen.
Sets default FTP remote Filename.
Uses a random port number as the local port.
Sets default Port number.
Sets default FTP Protocol.
Sets default Username.
Exits to the next higher level.
Sets FTP remote Filename.
Sets FTP server IP address or hostname to be connected to.
Sets a specific port for use as the local port. <number> = the number of the port to use.
Clears FTP server IP address or hostname.
Sets default Password.
Sets the Password used to logon to FTP server.
Sets the Port number which FTP server is listening to.
Selects FTP Protocol.
Selects FTPS Protocol.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the Username used to logon to FTP server.
Stores the current configuration in permanent memory.
Clears the screen.
Returns to the previous level.
Disables reset to factory defaults button function.
Enables reset to factory defaults button function.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Disables WPS PushButton button function.
Enables WPS PushButton button function.
Stores the current configuration in permanent memory.
Clears the screen.
View or edit an existing credential
Exits to the ssl level.
Show existing credential names
5: Commands and Levels
95