Lantronix SGX 5150 Command Reference Manual page 89

username <text>
write
connection 1 (config-action-http_post-connection:on scheduled reboot:1) level commands
clrscrn
default local port
default port
default protocol
exit
host <text>
local port <number>
no host
no password
no url
no username
password <text>
port <number>
protocol http
protocol https
show
show history
url <text>
username <text>
write
connection 1 (config-action-ftp_put-connection:on scheduled reboot:1) level commands
clrscrn
default filename
default local port
default port
default protocol
default username
exit
filename <text>
host <text>
local port <number>
no host
no password
password <text>
port <number>
protocol ftp
protocol ftps
show
show history
username <text>
write
connection 1 (config-action-http_post-connection:eth0 link state change:1) level commands
SGX™ 5150 IoT Device Gateway Command Reference
Sets the Username used to logon to FTP server.
Stores the current configuration in permanent memory.
Clears the screen.
Uses a random port number as the local port.<
Sets default Port number.
Sets default HTTP Protocol.
Exits to the next higher level.
Sets HTTP server IP address or hostname to be connected to.
Sets a specific port for use as the local port. <number> = the number of the port to use.
Clears HTTP server IP address or hostname.
Clears the Password.
Clears HTTP request URL.
Clears the Username.
Sets the Password used to logon to HTTP server.
Sets the Port number which HTTP server is listening to.
Selects HTTP Protocol.
Selects HTTPS Protocol.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets HTTP request URL following IP address or hostname.
Sets the Username used to logon to HTTP server.
Stores the current configuration in permanent memory.
Clears the screen.
Sets default FTP remote Filename.
Uses a random port number as the local port.
Sets default Port number.
Sets default FTP Protocol.
Sets default Username.
Exits to the next higher level.
Sets FTP remote Filename.
Sets FTP server IP address or hostname to be connected to.
Sets a specific port for use as the local port. <number> = the number of the port to use.
Clears FTP server IP address or hostname.
Sets default Password.
Sets the Password used to logon to FTP server.
Sets the Port number which FTP server is listening to.
Selects FTP Protocol.
Selects FTPS Protocol.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the Username used to logon to FTP server.
Stores the current configuration in permanent memory.
5: Commands and Levels
89