Lantronix SGX 5150 Command Reference Manual page 341

feed disable
feed enable
max entries <number>
persist disable
persist enable
show
show history
show status
write
rss (modbus-rss) level commands
clrscrn
exit
show
show history
trace input disable
trace input enable
write
security (config-security) level commands
clrscrn
exit
fips 140-2 mode disable
fips 140-2 mode enable
show
show history
write
security (config-profile-security:default_infrastructure_profile) level commands
advanced
apply wlan
basic
clrscrn
default key type
default suite
exit
key type hex
key type passphrase
no passphrase
passphrase <text>
show
show history
suite none
suite wep
suite wpa2-wpa mixed
SGX™ 5150 IoT Device Gateway Command Reference
Disables RSS feed.
Enables RSS feed.
Sets the maximum number of RSS feed entries.
Disables RSS feed data persistence.
Enables RSS feed data persistence.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Display the RSS Feed status
Stores the current configuration in permanent memory.
Clears the screen.
Exits to the next higher level.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Disables RSS trace of Modbus PDUs received on the serial line.
Enables RSS trace of Modbus PDUs received on the serial line.
Stores the current configuration in permanent memory.
Clears the screen.
Returns to the config level.
Disables the FIPS 140-2 Mode.
Enables the FIPS 140-2 Mode.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
Switch to advanced level
Try out WLAN settings without saving them to Flash. If the settings do not work, when you
reboot the device, it will still have the original settings.
Switch to basic level
Clears the screen.
Restores the key type to the default value (passphrase).
Restores the security method (suite) to the default value (None).
Exit to the profiles level
Sets the key type to hex.
Sets the key type to passphrase.
Removes the passphrase.
Sets the passphrase. Maximum 63 characters. <text> = put quotes around characters that
make up the passphrase. Please refer to other equipment manuals to determine the rec-
ommended passphrase input style. NOTE: A passphrase of 20 characters or more is rec-
ommended for maximum security. Spaces and punctuation characters are permitted.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Sets the security suite to None.
Sets the security suite to WEP.
Sets the security suite to WPA2/WPA Mixed Mode.
5: Commands and Levels
341