Lantronix SGX 5150 Command Reference Manual page 346

no normal message
no reminder interval
normal message <text>
reminder interval
<minutes>
show
show history
state disable
state enable
write
snmp trap (config-action-snmp_trap:eth0 link state change) level commands
alarm message <text>
clrscrn
exit
no alarm message
no normal message
no reminder interval
normal message <text>
reminder interval
<minutes>
show
show history
state disable
state enable
write
snmpd (config-snmp-snmpd) level commands
authentication password
<text>
authentication protocol
md5
authentication protocol
sha
clrscrn
default authentication
protocol
default port
default privacy protocol
default read community
default read-only authen-
tication protocol
default read-only privacy
protocol
default read-only security Restores to default SNMPv3 read-only security method: Authentication, No Privacy for
default security
default system descrip-
tion
SGX™ 5150 IoT Device Gateway Command Reference
Removes the normal message.
Clears the SNMP Trap reminder interval. SNMP Trap is sent once only.
Sets the message to be sent when the alarm turns off.
Sets the SNMP Trap reminder interval.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Does not send SNMP Trap.
Sends SNMP Trap when alarm condition is met.
Stores the current configuration in permanent memory.
Sets the message to be sent when the alarm turns on.
Clears the screen.
Exits to the next higher level.
Removes the alarm message.
Removes the normal message.
Clears the SNMP Trap reminder interval. SNMP Trap is sent once only.
Sets the message to be sent when the alarm turns off.
Sets the SNMP Trap reminder interval.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Does not send SNMP Trap.
Sends SNMP Trap when alarm condition is met.
Stores the current configuration in permanent memory.
Sets password used for authentication for agent.
Uses MD5 for authentication for agent.
Uses SHA for authentication for agent.
Clears the screen.
Restores to default SNMPv3 authentication method: MD5 for agent.
Restores the SNMP agent port to default: 161.
Restores to default SNMPv3 privacy encryption method: DES for agent.
Restores the SNMP read-only community to default: public
Restores to default SNMPv3 read-only authentication method: MD5 for agent.
Restores to default SNMPv3 read-only privacy encryption method: DES for agent.
agent.
Restores to default SNMPv3 security method: Authentication, No Privacy for agent.
Restores the SNMP system description to its default.
5: Commands and Levels
346