Lantronix SGX 5150 Command Reference Manual page 216

port <number>
protocol ssh
protocol ssl
protocol tcp
protocol tcp aes
protocol telnet
protocol udp
protocol udp aes
secure protocols ssl3
disable
secure protocols ssl3
enable
secure protocols tls1.0
disable
secure protocols tls1.0
enable
secure protocols tls1.1
disable
secure protocols tls1.1
enable
secure protocols tls1.2
disable
secure protocols tls1.2
enable
show
show history
show statistics
ssh username <text>
tcp keep alive <millisec-
onds>
tcp keep alive interval
<milliseconds>
tcp keep alive probes
<number>
tcp user timeout <milli-
seconds>
validate certificate disa-
ble
validate certificate enable Requires verification of the server certificate when connecting.
write
host 15 (tunnel-connect-host:3:15) level commands
address <text>
aes decrypt key <hexa-
decimal>
aes decrypt key text
SGX™ 5150 IoT Device Gateway Command Reference
Sets the remote port to use for connect mode tunneling. <number> = number of the port to
use.
Uses SSH protocol for connect mode tunneling.
Uses SSL protocol for connect mode tunneling.
Uses TCP protocol for connect mode tunneling.
Uses TCP protocol with AES encryption for connect mode tunneling.
Uses Telnet protocol (with IAC) for connect mode tunneling.
Uses UDP protocol for connect mode tunneling.
Uses UDP protocol with AES encryption for connect mode tunneling.
Disables the protocol.
Enables the protocol.
Disables the protocol.
Enables the protocol.
Disables the protocol.
Enables the protocol.
Disables the protocol.
Enables the protocol.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
show connection statistics
Sets the SSH user name for use when establishing tunneling connections with other devic-
es. <text> = SSH user name.
Sets the TCP keep alive idle time. This is the initial keep alive timeout. <milliseconds> =
timer value, in milliseconds.
Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> =
TCP keep alive for connect mode in milliseconds.
Sets the number of TCP keep alive probes. <number> = number of TCP keep alive probes.
Sets the timeout for TCP retransmissions. <milliseconds> = timeout value, in milliseconds.
Skips verification of the server certificate when connecting.
Stores the current configuration in permanent memory.
Sets the remote host to establish tunneling connections with. <text> = IP address or host
name of the remote host.
Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by
two adjacent hex digits. Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value
if it contains spaces.
Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by
5: Commands and Levels
216