Lantronix SGX 5150 Command Reference Manual page 85

show history
show status
start character <control> Sets the connect mode start character. The character may be input as text, control, deci-
write
connect (tunnel-connect:1) level commands
block network disable
block network enable
block serial disable
block serial enable
clrscrn
connect mode always
connect mode any char-
acter
connect mode disable
connect mode modem
control asserted
connect mode modem
emulation
connect mode start char-
acter
default connect mode
default host mode
default local port
default reconnect time
default start character
email connect <number> Sets an email profile to use to send an email alert upon establishing a connect mode tun-
email disconnect <num-
ber>
exit
flush serial disable
flush serial enable
flush start character dis-
able
flush start character ena-
ble
host <instance>
host mode sequential
host mode simultaneous Selects simultaneous connections to all hosts on the host list.
kill connection
local port <number>
no email connect
SGX™ 5150 IoT Device Gateway Command Reference
Displays the last 20 commands entered during the current CLI session.
Displays tunnel connect status.
mal, or hex. A control character has the form <control>C. A decimal value character has
the form \99. A hex value character has the form 0xFF.
Stores the current configuration in permanent memory.
Forwards (tunnels) network data in connect mode tunneling.
Discards all data coming in from the connect mode tunnel before forwarding it to the serial
interface (generally used for debugging).
Forwards (tunnels) serial data in connect mode tunneling.
Discards all data coming in from the serial interface before forwarding it to the connect
mode tunnel (generally used for debugging).
Clears the screen.
Enables the tunneling server to always establish tunneling connections.
Enables the tunneling server to establish a tunneling connection when a character is re-
ceived on the corresponding line (serial port).
Disables connect mode tunneling.
Enables the tunneling server to make tunneling connections when the modem control pin is
asserted.
Enables modem emulation for connect mode tunneling.
Enables connect mode tunneling when the configured start character is received on the
line.
Restores the default connect mode as 'disable'.
Connects to the first host in the list that accepts the connection.
Uses a random port number as the local port for establishing tunneling connections to oth-
er devices.
Restores the default reconnect time value for connect mode tunneling.
Defaults the connect mode start character.
nel. <number> = the number of the email profile to use.
Sets an email profile to use to send an email alert upon closing a connect mode tunnel.
<number> = the number of the email profile to use.
Returns to the tunnel level.
Characters already in the serial data buffer are retained upon establishing a connect mode
tunneling connection.
Flushes the serial data buffer upon establishing a connect mode tunneling connection.
Enables forwarding of the connect start character into the network.
Disables forwarding of the connect start character into the network.
Enters the next lower level. Specify the instance for the next lower level.
Connects to the first host in the list that accepts the connection.
Disconnects the active connect mode tunneling connection or connections.
Sets a specific port for use as the local port. <number> = the number of the port to use.
Discontinues sending email alerts upon establishing a connect mode tunnel.
5: Commands and Levels
85