Lantronix SGX 5150 Command Reference Manual page 260

secure protocols tls1.1
enable
secure protocols tls1.2
disable
secure protocols tls1.2
enable
show
show history
show statistics
ssh username <text>
tcp keep alive <millisec-
onds>
tcp keep alive interval
<milliseconds>
tcp keep alive probes
<number>
tcp user timeout <milli-
seconds>
validate certificate disa-
ble
validate certificate enable Requires verification of the server certificate when connecting.
write
host 5 (tunnel-connect-host:2:5) level commands
address <text>
aes decrypt key <hexa-
decimal>
aes decrypt key text
<text>
aes encrypt key <hexa-
decimal>
aes encrypt key text
<text>
auto show statistics
clrscrn
credentials <text>
default protocol
default secure protocols
default tcp keep alive
default tcp keep alive
interval
default tcp keep alive
probes
exit
initial send binary <bina- Sets the host connect tunnel Initial Send text allowing for binary characters. <binary> =
SGX™ 5150 IoT Device Gateway Command Reference
Enables the protocol.
Disables the protocol.
Enables the protocol.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
show connection statistics
Sets the SSH user name for use when establishing tunneling connections with other devic-
es. <text> = SSH user name.
Sets the TCP keep alive idle time. This is the initial keep alive timeout. <milliseconds> =
timer value, in milliseconds.
Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> =
TCP keep alive for connect mode in milliseconds.
Sets the number of TCP keep alive probes. <number> = number of TCP keep alive probes.
Sets the timeout for TCP retransmissions. <milliseconds> = timeout value, in milliseconds.
Skips verification of the server certificate when connecting.
Stores the current configuration in permanent memory.
Sets the remote host to establish tunneling connections with. <text> = IP address or host
name of the remote host.
Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by
two adjacent hex digits. Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value
if it contains spaces.
Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by
a single character. Note that quotes must enclose the value if it contains spaces.
Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by
two adjacent hex digits. Bytes may run together or be separated by optional punctuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value
if it contains spaces.
Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by
a single character. Note that quotes must enclose the value if it contains spaces.
show connection statistics
Clears the screen.
Selects the RSA/DSA certificates by name for the SSL client.
Restores the default connect mode tunneling protocol as 'TCP'.
Restores the default secure protocol selections.
Defaults the TCP keep alive idle time.
Restores the default 45 second connect mode TCP keep alive timeout.
Defaults the TCP keep alive probes.
Exits to the next higher level.
5: Commands and Levels
260