Lantronix SGX 5150 Command Reference Manual page 275

ry>
initial send set <text>
no address
no aes decrypt key
no aes encrypt key
no credentials
no initial send
no port
no ssh username
no tcp user timeout
port <number>
protocol ssh
protocol ssl
protocol tcp
protocol tcp aes
protocol telnet
protocol udp
protocol udp aes
secure protocols ssl3
disable
secure protocols ssl3
enable
secure protocols tls1.0
disable
secure protocols tls1.0
enable
secure protocols tls1.1
disable
secure protocols tls1.1
enable
secure protocols tls1.2
disable
secure protocols tls1.2
enable
show
show history
show statistics
ssh username <text>
tcp keep alive <millisec-
onds>
tcp keep alive interval
<milliseconds>
tcp keep alive probes
<number>
tcp user timeout <milli-
SGX™ 5150 IoT Device Gateway Command Reference
string in binary format that will be sent out the network upon connection. Within [] use bina-
ry decimal up to 255 or hex up to 0xFF.
Sets the host connect tunnel Initial Send text. <text> = ascii string that will be sent out the
network upon connection.
Removes the remote host address used to establish tunneling connections.
Removes the connect tunnel AES decrypt key.
Removes the connect tunnel AES encrypt key.
Clears the RSA/DSA certificate selection for the SSL client.
Removes the host connect tunnel Initial Send string.
Removes the remote port used to establish tunnel connections.
Removes the SSH user name.
Restores the default.
Sets the remote port to use for connect mode tunneling. <number> = number of the port to
use.
Uses SSH protocol for connect mode tunneling.
Uses SSL protocol for connect mode tunneling.
Uses TCP protocol for connect mode tunneling.
Uses TCP protocol with AES encryption for connect mode tunneling.
Uses Telnet protocol (with IAC) for connect mode tunneling.
Uses UDP protocol for connect mode tunneling.
Uses UDP protocol with AES encryption for connect mode tunneling.
Disables the protocol.
Enables the protocol.
Disables the protocol.
Enables the protocol.
Disables the protocol.
Enables the protocol.
Disables the protocol.
Enables the protocol.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
show connection statistics
Sets the SSH user name for use when establishing tunneling connections with other devic-
es. <text> = SSH user name.
Sets the TCP keep alive idle time. This is the initial keep alive timeout. <milliseconds> =
timer value, in milliseconds.
Enables TCP keep alive for connect mode tunneling and sets the timer. <milliseconds> =
TCP keep alive for connect mode in milliseconds.
Sets the number of TCP keep alive probes. <number> = number of TCP keep alive probes.
Sets the timeout for TCP retransmissions. <milliseconds> = timeout value, in milliseconds.
5: Commands and Levels
275