Lantronix SGX 5150 Command Reference Manual page 296

no secondary dns
primary dns <IP ad-
dress>
priority <number>
qos
secondary dns <IP ad-
dress>
show
show history
show status
state disable
state enable
write
if 2 (config-if:wlan0) level commands
clrscrn
default gateway <IP ad-
dress>
default mtu
default priority
dhcp client id <text>
dhcp disable
dhcp enable
dhcp renew
domain <text>
exit
failover
hostname <text>
if <instance>
ip address <ip ad-
dress/cidr>
ipv4 state disable
ipv4 state enable
ipv6 address <ipv6 ad-
dress/prefix>
ipv6 auto configure ena-
ble
ipv6 default gateway
<ipv6 address>
ipv6 dhcp enable
ipv6 domain <text>
ipv6 primary dns <ipv6
address>
SGX™ 5150 IoT Device Gateway Command Reference
Clears the name of the secondary DNS server.
Sets the IP address of the primary DNS server.
Sets the priority for interface. <number> = priority number.
Enter QoS configuration level
Sets the IP address of the secondary DNS server.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Show interface status
Disables the interface.
Enables the interface.
Stores the current configuration in permanent memory.
Clears the screen.
Sets the configurable gateway IP address to the default value.
Restores the default Maximum Transmission Unit (MTU) size.
Restores the default priority for the interface.
Sets the DHCP client ID.
Disables DHCP.
Enables DHCP.
Force DHCP to renew
Sets the domain name. <text> = name of the domain.
Exits to the config level.
Enter failover configuration level
Sets the host name. <text> = name of the host.
Changes to the interface configuration level.
Sets the IP address and network mask. Formats accepted: 192.168.1.1 (default mask)
192.168.1.1/24 (CIDR) "192.168.1.1 255.255.255.0" (explicit mask)
Disables IPv4 for the interface.
Enables IPv4 for the interface.
Sets the IPv6 static address. IPv6 addresses are written in eight groups of four hexadeci-
mal digits separated by colons, such as 2001:0db8:85a3:0000:0000:8a2e:0370:7334 Net-
work address ranges are written in CIDR notation. A network is denoted by the first ad-
dress in the block (ending in all zeroes), a slash (/), and a decimal value equal to the size
in bits of the prefix
Enables IPv6 stateless address autoconfiguration.
Sets the IPv6 default gateway. IPv6 addresses are written in eight groups of four hexadec-
imal digits separated by colons, such as 2001:0db8:85a3:0000:0000:8a2e:0370:7334 Net-
work address ranges are written in CIDR notation. A network is denoted by the first ad-
dress in the block (ending in all zeroes), a slash (/), and a decimal value equal to the size
in bits of the prefix
Enables IPv6 DHCP.
Sets the IPv6 domain name. <text> = name of the domain.
Sets the IPv6 address of the primary DNS server. IPv6 addresses are written in eight
groups of four hexadecimal digits separated by colons, such as
2001:0db8:85a3:0000:0000:8a2e:0370:7334 Network address ranges are written in CIDR
5: Commands and Levels
296