Lantronix SGX 5150 Command Reference Manual page 91

default mqtt host
default mqtt local port
default mqtt port
default port
default proxy port
default proxy type
exit
host <text>
local port <number>
mqtt host <text>
mqtt local port <number> Sets the local port for Mach10 MQTT client. When configured, a total of 32 consecutive
mqtt port <number>
mqtt security disable
mqtt security enable
mqtt state disable
mqtt state enable
no proxy host
no proxy password
no proxy username
port <number>
proxy host <text>
proxy password <text>
proxy port <number>
proxy type socks5
proxy username <text>
secure port disable
secure port enable
show
show history
use proxy disable
use proxy enable
validate certificates disa-
ble
validate certificates ena-
ble
write
connection 2 (config-action-http_post-connection:wlan0 link state change:2) level commands
clrscrn
default local port
default port
default protocol
exit
host <text>
local port <number>
SGX™ 5150 IoT Device Gateway Command Reference
Restores the Hostname or IP address of MQTT server.
Clears the local port for Mach10 MQTT client.
Restores the Port of MQTT server.
Restores the Port of Mach 10.
Restores the Port of proxy server.
Restores the default Proxy server type (SOCKS5).
Exits to the next higher level.
Sets the Hostname or IP address of Mach 10.
Sets the local port for Mach10 client. When configured, a total of 16 consecutive ports will
be reserved.
Sets the Hostname or IP address of MQTT server.
ports will be reserved.
Sets the Port of MQTT server.
Disables SSL for MQTT.
Enables SSL for MQTT.
Disables MQTT.
Enables MQTT.
Restores the Hostname or IP address of the proxy server.
Restores the password for proxy server.
Clears the user name for the proxy server.
Sets the Port of Mach 10.
Sets the Hostname or IP address of the proxy server.
Sets the password the proxy server.
Sets the Port of the proxy server.
Sets the Proxy server type to SOCKS5
Sets the user name for the proxy server.
Disables HTTPS for Mach10 client.
Enables HTTPS for Mach10 client.
Shows the current configuration.
Displays the last 20 commands entered during the current CLI session.
Disables use of proxy server for this connection.
Enables use of proxy server for this connection.
Disables certificate validation for Mach10 client.
Enables certificate validation for Mach10 client.
Stores the current configuration in permanent memory.
Clears the screen.
Uses a random port number as the local port.
Sets default Port number.
Sets default HTTP Protocol.
Exits to the next higher level.
Sets HTTP server IP address or hostname to be connected to.
Sets a specific port for use as the local port. <number> = the number of the port to use.
5: Commands and Levels
91